Pushwheel Selector Switches
Selector switches from CHERRY have proven their worth many times over in a wide variety of applications. Three different sizes plus a wide choice of encoding options mean that switches can easily be tailored to specific applications.
You too can benefit from the experience built into each and every one of our selector switches.
 |
PA Series
Dimensions: 7.62 x 15 x 18 mm
Mounting depth: 24 or 34.5 mm
- 10 or 16 switching positions
- Very small dimensions
- Front mounting
- Integrated pins for module mounting
- Integrated snap-in endcaps
- Black housing
- Extended PCB available for mounting additional components
- Connection using QC terminal or solder pins
|
 |
PB Series
Dimensions: 6 x 18 x 15.6 mm
Mounting depth: 19.5 mm
- 10 switching positions
- Housing only 6mm wide
- Front mounting
- Integrated pins for module mounting
- Integrated snap-in endcaps
- Black housing
- Connection using solder pins
|
 |
PE Series
Dimensions: 7.62 x 24 x 26 mm
Mounting depth: 32 or 42 mm
- Standard selector switch with 10 or 16 switching positions
- Front mounting
- Integrated pins for module mounting
- Integrated snap-in endcaps
- Black housing
- Extended PCB available for mounting additional components
- Connection using QC terminal or solder pins
|
 |
Connectors
- Connectors make it very easy to connect selector switches
- Available with or without flange, they can be readily adapted to different mounting arrangements
- Connector terminals may take the form of either solder pins or solder lugs
|
Click here 
