Magnetic Hall Effect Sensors

Magnetic Proximity Sensors

Digital Vane Switch

Magnetically activated digital vane switch in a rugged, overmolded plastic housing with three pins or 3-wire harness.

VN1015

Available in Two Operating Temperature Ranges
Immune from Moisture and Dust
Reliable and Repeatable
No Mechanical Contacts to Wear Out
Operate from 5 to 24Vdc
Reverse Battery Protection to -24Vdc
Open Collector Output Compatible with all Logic Families
Sensor Body Material: Glass-Filled Polyester
Recommended Vane Parameters
- Material: Low Carbon, Cold-Rolled Steel
- Minimum Dimensions: 0.040" thick, 0.250" wide
- Vane Should Penetrate to a Depth Less Than 0.120" From Bottom of Sensor Slot

VN1015 SPECIFICATIONS

Part #	Operating Voltage Range (VDC)	Supply Current mA max	Output	Output Saturation Voltage mV max	Output Current mA max	Operate Temp Range °C	Storage Temp Range °C	Termination
VN101501	3.8 to 24	7.5	3 pin sink	400	25	-40 to 85	-40 to 85	pins
VN101502	3.8 to 24	7.5	3 pin sink	400	25	-40 to 150	-40 to 150	pins
VN101503	3.8 to 24	7.5	3-wire sink	400	25	-40 to 85	-40 to 85	24AWG x 150mm leads
VN101504	3.8 to 24	7.5	3-wire sink	400	25	-40 to 150	-40 to 150	24AWG x 150mm leads

Open Collector Sinking Block Diagram

Dimensions

Specifications subject to change without notice.